Minnesota Chapter of ASM International

Technical Meeting: “Using Auger, EDS, and FIB to Detect, Identify, and Image Buried Metallic Particles”

Ashley Ellsworth, Staff Scientist, Physical Electronics

Abstract:

Auger Electron Spectroscopy (AES) is a powerful analytical tool that provides quantitative elemental information from surfaces of solid materials. The average depth of analysis for an AES measurement is approximately 5 nm with lateral spatial resolution as small as 8 nm.  The information AES provides about surface layers or thin film structures is important for many industrial and research applications where surface or thin film composition plays a critical role in performance including: nanomaterials, photovoltaics, catalysis, corrosion, adhesion, semiconductor devices and packaging, magnetic media, display technology, and thin film coatings used for numerous applications.

In this presentation, we demonstrate the use of AES in conjunction with a focused ion beam (FIB) to produce site specific imaging of microscale features beneath a sample surface. The combination of the two techniques allows for high spatial resolution analysis of buried particles and defects. This information can be very useful in helping to determine important parameters such as the origin of defects, corrosion mechanisms, coating problems, etc. We will highlight the advantages of FIB milling compared to traditional depth profiling. Energy dispersive x-ray spectroscopy (EDS) is also a powerful complementary technique to Auger analysis as it provides information from much deeper in the sample surface (few µm). With the combination of AES, FIB, and EDS, we show that buried metal particles can be first located and characterized with EDS, followed by the subsequent FIB milling and high spatial resolution Auger spectroscopy and imaging of the particles.

Biographical Information:

Ashley Ellsworth is a Staff Scientist specializing in Auger Electron Spectroscopy analysis at Physical Electronics in Chanhassen, MN. As a staff scientist, she provides technical expertise to PHI in support of new product and application development while demonstrating PHI system performance capabilities. She performs a wide variety of complex AES analyses to meet urgent customer needs. She also participates in application projects and supports internal R&D and software development. Her AES expertise supports a broad range of surface science applications, including thin films, coatings, material failure, defects, contamination, biomaterials, and materials engineering.

Ashley received B.S. degrees in chemistry and biology from the University of Texas at Tyler in 2012. She received her Ph.D. in chemistry in 2017 from the University of Texas at Dallas under the guidance of Prof. Amy Walker. Her doctoral research aimed to develop a novel electroless deposition technique to synthesize metallic nanostructures with precise placement and control on micropatterned organic substrates. She utilized a variety of surface analytical techniques throughout her doctoral research to characterize the deposited nanostructures, including TOF-SIMS, XPS, AFM, and SEM.

Location Crane Engineering, part of ESI
2355 Polaris Lane North, Suite 120
Plymouth
MN
55447
USA
7635579090
https://www.craneengineering.com/
Registrations are now closed

Attendees

schenk@email
Kurt SchenkMEENon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
biss0089@email
Michael BissenAbbottNon Member [NO MEAL] $0$0.00$10.00$-10.00Pay now with Paypal (fee)
steven.axdal@email
Steven AxdalAbbottNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
scsaas67@email
Al SwigloSwiglo Metallurgical ConsultingNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
jnewman@email
John NewmanPhysical Electronics0$999,999.00$0.00$999,999.00Pay at the Door
meweiss@email
Mark WeissCrane/ESi Non Member [NO MEAL] $0$0.00$30.00$-30.00Pay now with Paypal (fee)
Hugh RobinsonNon Member [NO MEAL] $0
Lloyd MeissnerNon Member [NO MEAL] $0
fjohnson@email
Frank JohnsonNiron Magnetics, Inc.Non Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
kartyushkova@email
Kateryna ArtyushkovaPhysical Electronics0$999,999.00$0.00$999,999.00Pay at the Door
jeff@email
Jeff PfaendtnerKP EngineeringNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
jmann@email
Jennifer MannPhysical Electronics0$999,999.00$0.00$999,999.00Pay at the Door
paul.nagata@email
Paul NagataVista OutdoorNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
azraelstar2005@email
Karen Olson Vista Outdoor Non Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
joe.hirvela@email
Joe hirvelaCPP Minneapolis OperationNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
les@email
Lester EngelEngel MetallurgicalNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
James BrussoNon Member [NO MEAL] $0
dwill3626@email
Devin WilliamsonDonaldson CompanyNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
jrosenow@email
John RosenowEbatcoNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
anne.lisa.swartz@email
Lisa SwartzPHINon Member [NO MEAL] $0$999,999.00$10.00$999,989.00Pay now with Paypal (fee)
Ashley Ellsworth0
margaret.flury@email
Margaret FluryMedtronicNon Member [NO MEAL] $0$0.00$10.00$-10.00Pay now with Paypal (fee)
joyclifford@email
Joy CliffordASM MN0$999,999.00$0.00$999,999.00Pay at the Door
john@email
John HalleyAdvanced Met Solutions Non Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
mybaker820@email
Mark BakerCollins AerospaceNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
tom.steigauf@email
Tom SteigaufMedtronicNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
charly.arkens@email
Charly ArkensElement Materials TechnologyNon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
tom@email
Thomas E. JohnsonRMENon Member [NO MEAL] $0$0.00$0.00$0.00Pay at the Door
AttendeeAttendee NameCompanyAttendee TypeTotal FeesAmount PaidOutstanding BalancePayment Method